- Timber on a galvanised steel frame
- Sealed all six faces before hanging
- Tip-up or sectional mechanism
A wooden garage door is chosen for appearance, and it earns that choice on the right house. In Vanderbijlpark we fit them mostly on the riverside properties at Vaaloewer and Riverside, on the larger homes in the newer developments, and on houses where the owner wants the elevation lifted out of the ordinary.
Wooden garage doors we supply in Vanderbijlpark
- Hardwood sectional doors with the panel construction that suits the elevation.
- Timber tip-up doors on new or existing frames.
- Timber-clad steel doors where the look is wanted with less maintenance.
- Meranti and other hardwoods, selected for stability rather than only for grain.
Timber and airborne fallout
This is the local caution and it is worth stating. Ferrous dust settles into an open-grained or textured timber finish and speckles it, and on a sealed timber door that shows more readily than on smooth painted steel. On properties close to the plant we will recommend a smooth finish or a timber-clad steel door instead, and explain why before taking an order for solid timber.
Timber on riverside properties
Away from the fallout, on the river side of town, a timber door is a straightforward proposition and suits those houses well. Humidity there is higher, so sealing matters, and we specify accordingly.
Weight, and what it means for the rest of the door
Timber doors are heavy. The frame has to carry it, the balance has to be rated for the finished door rather than the previous one, and the operator has to be sized on the real mass. A timber door on hardware specified for a steel one fails early and takes the hardware with it.
Sealing on all six faces
A door sealed only where it shows will take up moisture through the top and bottom edges and move. We seal all six faces, including the edges nobody sees, and that single detail is most of the difference between a timber door that stays true and one that does not.
Maintenance, stated honestly
A timber garage door needs recoating. On a sheltered opening that might be every three or four years; on a west-facing one in full sun it is sooner. We give the interval for your specific opening at survey rather than an optimistic average.
Timber-clad steel as the alternative
Where the look matters more than the material, a steel or insulated door with a timber-look finish gives the appearance with almost no maintenance, washes clean, and will still look right in ten years. In this town that recommendation comes up more often than the solid timber sale.
What a wooden garage door costs in Vanderbijlpark
More than steel, both to buy and to keep. Priced on opening size, timber, construction, finish and automation, with the maintenance expectation set out in writing.
Common questions
About wooden garage doors
Meranti is the sensible all-round choice in South Africa: stable, takes stain evenly and reasonably priced. Cedar is lighter, which matters on a wide double door, and naturally insect-resistant. Saligna is beautiful but heavy. Pine only works under a deep overhang with disciplined recoating.
Look at it once a year. If the finish has gone matt or chalky at the bottom rail or the vertical edges, sand lightly and put two coats on. North- and west-facing doors in Gauteng need it more often than sheltered doors at the coast.
Usually because the back and the end grain were never sealed. Water goes in at the unsealed edges and the board moves. We seal all six faces on the bench before the door is hung, and build the timber onto a galvanised steel frame that carries the load.
No — timber cannot curl around a barrel. A wooden door runs as a tip-up panel or as a hinged sectional door. If you have no headroom for either, a woodgrain-finish aluminium door gives the same look on a roll-up mechanism.
Related
Also worth a look
Sectional Garage Doors
Where headroom allows a panel stack
Sectional doors lift in hinged panels that stack flat against the ceiling. They seal better than any other garage door and run quietly enough not to…
- 40mm insulated panels
- Full perimeter weather seals
- Glazed panel options
Perforated Roller Shutter Doors
Heat extraction for hot works
Perforated curtains for furnace, welding and hot work areas that need heat out while the opening stays covered.
- Punched galvanised slat, mixed options
- Openings to 6 000mm wide
Residential Roller Shutter Doors
SE and SW suburbs, Vaal Park
Garage doors for Vanderbijlpark homes, built to the measured opening and finished to hold up against dust carried off the works.
- Insulated aluminium, quiet running
- Battery backup for load shedding
